Início da fotografia
Início da fotografia
Para que o processo fotográfico finalmente surgisse tal como
o conhecemos, foi preciso esperar até o século XIX. Nessa época os franceses Niepce e Daguerre descobriram através de livros antigos a
existência da câmara escura de Leonardo da Vinci e a teoria da sensibilidade
dos sais de prata à luz,descrita por Schulze.
Joseph Nicéphore Niépce e Louis Jacques Mandé Daguerre
Unindo as duas coisas, conseguiram idealizar a máquina e o
filme fotográficos. Em vez de usar a câmara escura para desenho, Niepce e
Daguerre substituíram o pergaminho onde se desenhava por uma chapa de cobre
coberta com uma fina camada de prata, misturada com vapor de iodo. Esta chapa de sal de prata sensível à luz
gravava a imagem produzida nitidamente pela câmara escura.
Beginning of
photography
For the photographic process finally emerge as we have
known, It would take until the nineteenth century. At that time two Frenchmen,
Niepce and Daguerre, they found through
old books the existence of the dark chamber of Leonardo da Vinci and the theory
of sensitivity of silver salts to light, described by Schulze.
Joining both processes, they were able to idealize the
machine and photographic film. Instead of using the dark chamber for drawing,
Niepce and Daguerre have replaced parchment which was designing of a copper
plate covered with a thin layer of silver mixed with iodine vapor. This silver
salt plate sensitive to light would burn the image clearly produced by the
darkroom.
Mas a idéia básica
ainda tinha varias imperfeições:
a) A imagem era
gravada muito suavemente.
b) a foto ficava
completamente preta ao ser observada pois a luz ambiente enegrecia toda a
chapa.
c) a chapa tinha
que ser exposta à luz por muito tempo e por este motivo, os objetos em
movimento ficavam borrados, pois sua imagem movimentava-se na chapa durante a
exposição.
As soluções foram
aparecendo gradativamente:
a) Para que a imagem fosse gravada mais intensamente, foi
inventado um processo físico-químico denominado revelação da imagem. Depois de exposta à luz, a chapa era submetida
ao vapor de mercúrio, intensificando a imagem.
b) Para que a imagem não se escurecesse sob a ação da luz
ambiente, foi criado o processo de fixação. Nele um banho em uma solução de
tiosulfato de sódio retirava da chapa os sais de prata que não haviam sido
utilizados na gravação da imagem. Assim,
a foto podia ser observada a qualquer luz sem ficar preta.
c) O problema do longo tempo de exposição foi solucionado de
duas formas:
1) aumentando a sensibilidade dos
sais de prata para que a gravação da imagem fosse mais rápida.
2) aumentando a quantidade e
intensidade dos raios de luz que formam a imagem.
Para aumentar a sensibilidade dos filmes, foram feitas
misturas com prata e cloro (cloreto de prata), prata e iodo (iodeto de prata) e
com prata e bromo (brometo de prata). Esta última é a mais usada nos filmes
atuais.
O problema do aumento quantidade e intensidade da dos raios
de luz foi mais complicado, pois se o orifício da câmara fosse maior para
deixar passar mais luz, imagem ficava desfocada. Este problema foi solucionado
por Wollaston que pensou em aumentar o diâmetro do orifício e colocar nele uma
lente convergente, aproveitando mais raios de luz. A luz difusa do objeto
chegava até a lente e esta convergia seus raios até a parte posterior da câmara
escura, onde estava colocado o filme.
Assim, chegava a ele uma imagem nítida e muito mais luminosa.
Estava então
inventada a fotografia!
Foto mais antiga tirada por Niépce, por volta de 1826
But the basic idea still had several
imperfections:
a) The images were recorded very softly.
b) The plate became completely dark
to see in an enviroment illuminated, getting totally dark
c) The plate needs to be exposed to the light for a long time and for this
reason, the moving objects were blurry because his image is moved around in the
plate during exposure.
The solutions were gradually appearing:
a) For the image was recorded more intensely, was invented a
physical-chemical process called revelation of the image. After exposed to the
light, the plate was subjected to mercury vapor intensifying the image.
b) In order for the image is not it got dark by the action of ambient
light, the fixation process was created. In him a bath in a solution of sodium
thiosulfate remove the plate silver salts which were not been utilized in image
recording. Thus, the picture could be observed at any light without become dark
c) The problem of long exposure time has been solved in two ways:
1) increasing the sensitivity of
silver salts for the image recording got faster.
2) increasing the amount and intensity
of light rays which form the image.
To increase
the sensitivity of the films, blends were made with silver chloro (silver
chloride), silver and iodine (silver iodide) and silver bromo (silver bromide).
This last is the most used in today's movies.
The problem
of the increased number and intensity of light rays was more complicated,
because increasing the camera aperture to pass more light, the image blurred.
This problem was solved by Wollaston who thought to increase the diameter of
the hole and put it in a converging lens, and more light rays.
Diffuse
light from the object has even lenses and this converged its rays to the back
of the darkroom, where he put the film. Then he got a clearer and brighter
image .
Was then invented photography!
Boulevard du Temple (1838)
Daguerreotype 1839 Daguerre Atelier (1837)
Nascimento das
objetivas
As lentes, porém, provocam alguns defeitos (aberrações) que
fazem com que a imagem, não fique perfeitamente nítida. Estas aberrações podem
ser corrigidas adicionando outras lentes.
A idéia de Wollaston foi extremamente melhorada por Petzval
em 1840. Por meio de cálculos físico-matemáticos, conseguiu unir várias lentes
que compensavam mutuamente seus defeitos e produziam uma imagem mais nítida
sobre o filme. Este conjunto de lentes é chamado de objetiva.
Descobriu-se também que fazendo com que os raios de luz
passassem por um pequeno orifício colocado no centro da objetiva, seus defeitos
seriam atenuados, produzindo uma imagem ainda mais nítida.
O elemento adicionado para regular o diâmetro deste orifício
foi chamado de diafragma. Assim surgiu a primeira objetiva construída através
de cálculos e não simplesmente com base na experiência prática.
Atualmente,
é possível gravar a imagem em tempos tão curtos que podemos conseguir imagens
nítidas de objetos que se deslocam a grandes velocidades como, por exemplo, a
bala de um revolver quebrando uma lâmpada de vidro.
Birthday Unknown of the objective lens
The lenses,
however, may cause some defects (aberrations),these aberrations form an
imperfect image. These anomaly can be corrected by adding other lenses.
The idea of
Wollaston was greatly improved by Petzval in 1840. Through
physical-mathematical calculations, he managed to unite several lenses mutually
compensated for their defects and producing a sharper image on the film. This
set of lenses is called objective.
It was also
found out that by making the light rays pass through a small hole at the center
of objective, its defects would be attenuated and by producing a sharper image.
The element
added to adjust the diameter of this hole is called diaphragm. Thus arose the
first lens constructed by calculation and not simply based on practical
experience.
Currently,
you can record an image in such a short time we can accomplish sharp images of
objects moving at high speeds, for example, the bullet of a gun breaking a
glass lamp.



















































